Compass, P. 387, Compass calibration – HONDA 1984 Accord Coupe - Owner's Manual User Manual
Page 388
387
Features
Compass
*
When you set the power mode to ON, the compass self-calibrates, and the compass
display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
1. Set the power mode to ON.
2. On the top screen of any audio source,
press and hold
for five seconds.
u
The display switches to the Compass
Settings screen.
3. Rotate
to
select
Calibration, then press
.
4. When the display changes to Calibration
Start, press
.
5. Drive the vehicle slowly in two circles.
u
The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
1
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1
Calibrate the compass in an open area.
While setting the compass, press the BACK button to
cancel the setting mode and return to the previous
screen.
* Not available on all models
14 ACCORD 2D-31T3L6100.book 387 ページ ２０１４年３月１４日 金曜日 午後４時４５分