HONDA 1984 Accord Coupe - Owner's Manual - Manual (Page 477)

476
uu Replacing Light Bulbs u Fog Light Bulbs *
Main
tenan
ce
Fog Light Bulbs *
When replacing, use the following bulbs.
1. Remove the screw using a Phillips-head
screwdriver and carefully pull the fog light
assembly out of the bumper.
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert a new bulb into the fog light
assembly and turn it to the right.
5. Insert the coupler into the connector of the
bulb.
Fog Light: 35 W (H8 for halogen bulb type)
1 Fog Light Bulbs *
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
Screw
Tab
Coupler
Bulb
* Not available on all models
14 ACCORD 2D-31T3L6100.book 476 ページ ２０１４年３月１４日 金曜日 午後４時４５分