HONDA 1984 Civic Sedan - Owner's Manual - Manual (Page 386)

385
uu Replacing Light Bulbs u Brake/Taillight, Rear Turn Signal Light and Rear Side Marker Light Bulbs
Main
tenan
ce
Brake/Taillight, Rear Turn Signal Light and Rear Side
Marker Light Bulbs
When replacing, use the following bulbs.
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket to the left and remove it.
3. Remove the old bulb and insert a new bulb.
Brake/Taillight: 21/5 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Marker Light: LED
1 Brake/Taillight, Rear Turn Signal Light and Rear Side Marker Light
Bulbs
Rear side marker light bulbs are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
Clip
Push until the
pin is flat.
Lining
Clip
Bulb Socket
Bulb
Socket
14 CIVIC 4D_SI-31TR36210.book 385 ページ ２０１４年１月３０日 木曜日 午後１２時１８分