HONDA 1984 Civic Sedan - Owner's Manual - Manual (Page 73)

72
uu Indicators u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message *
High Temperature
Indicator
● Comes on for a few seconds when
you turn the ignition switch to ON
( w *1 , then goes off.
● Blinks when the engine coolant
temperature goes up, and stays on if
the temperature continues to rise.
● Blinks while driving - Drive slowly to
prevent overheating.
● Stays on while driving - Immediately
stop in a safe place and allow the
engine to cool.
2 Overheating P. 433
Vehicle Stability
Assist (VSA®)
System Indicator
● Comes on for a few seconds when
you turn the ignition switch to ON
( w *1 , then goes off.
● Blinks when VSA® is active.
● Comes on if there is a problem with
the VSA® system or hill start assist
system.
● Stays on constantly - Have your
vehicle checked by a dealer.
2 Vehicle Stability Assist (VSA®), aka
Electronic Stability Control (ESC),
System P. 329
Vehicle Stability
Assist (VSA®) OFF
Indicator
● Comes on for a few seconds when
you turn the ignition switch to ON
( w *1 , then goes off.
● Comes on when you deactivate
VSA®.
2 VSA® On and Off P. 330 —
Door Open
Indicator
● Comes on for a few seconds if you
turn the ignition switch to ON
( w *1 ,
then goes off.
● Comes on if any door is not
completely closed.
● The beeper sounds and the indicator
comes on if any door is opened
while driving.
● Goes off when all doors are closed.
* Not available on all models
14 CIVIC 4D_SI-31TR36210.book 72 ページ ２０１４年１月３０日 木曜日 午後１２時１８分