HONDA 2014 CR-Z - Navigation Manual - Manual (Page 117)

116
Aud
io
Playing FM/AM Radio
Selecting FM/AM Mode
1. Press the FM/AM button.
 Press the FM/AM button again,
if necessary, to select the
frequency band (FM1, FM2,
AM).
 The band and frequency are
displayed.
2. Select AUDIO/STREET until
AUDIO is highlighted in blue.
 The preset keys are displayed at
the bottom of the screen.
3. Select the preset key.
 You can also select a station
using the SEEK/SKIP button.
1 Playing FM/AM Radio
d “Display audio screen”
You can control the radio using voice
commands.
2 Radio Commands P. 197
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
The ST indicator comes on the display for stereo
FM broadcasts. Stereo reproduction in AM is not
available.
The radio can receive the complete AM and FM
bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store six AM stations and 12 FM stations
in the preset buttons. FM1 and FM2 let you store
six stations each.
Preset keys