HONDA 2014 CR-Z - Navigation Manual - Manual (Page 27)

26
 Interface Settings  Color
S
y
stem Setup Set the screen brightness separately for Day and Night modes. Press the a
(Display mode) button to cycle through the display modes (Day to Night to Off).
1. Press the a button.
 The Brightness bar is displayed
for a few seconds.
2. Press the a button again.
 Repeat the procedure to switch
the display modes.
 Select b or n to adjust the
brightness.
■ Switching Display Mode Manually 1 Switching Display Mode Manually
A visual guide helps you see the difference
between Day and Night modes.
2 Day or Night Mode P. 8
Recommended Settings
• Select mid-range for the dash illumination.
• Select White for the map Day display and
Black for the map Night display.