HONDA 2014 Insight - Owner's Manual - Manual (Page 120)

If you want to set the default settings,
press the INFO (
/ ) button to
select DEFAULT ALL, then press
the SEL/RESET button.
If you want to cancel DEFAULT
ALL, select CANCEL, then press the
SEL/RESET button. The screen
goes back to the previous display.
To set the default settings, press the
INFO (
/ ) button to select SET
then press the SEL/RESET button.
When DEFAULT ALL is set, you will
see the above display for several
seconds, then the screen returns to
the default all setting display.
If the setting is not successfully
completed, ‘‘FAILED’’ is shown for
several seconds, and then the
screen goes back to SETUP. Repeat
the same procedure to select
DEFAULT ALL.
DEFAULT ALL
Multi-Information Display
117
12/07/13 16:52:05 31TM8630_122
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
TOC
2014 Insight