HONDA 2014 Insight - Owner's Manual - Manual (Page 328)

Remove the socket from the front
turn signal light assembly by
turning it one-quarter turn
counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
front turn signal light assembly.
Turn it clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Install the garnish in the original
position securely. Place a cloth on the notch of the
light assembly garnish to prevent
scratches. Remove the cover by
carefully prying in the notch with a
flat-tip screwdriver.
Remove the bolts and pull the
front turn signal light assembly
from the bumper while taking the
tab out from the holder.
Install the light assembly in the
reverse order of removal. Make
sure to secure the bolts.
5.
6.
1.
7.
8.
3.
4.
2.
Lights
Replacing the Front
Turn Signal Light Bulb
325
NOTCH
COVER BOLTS
BULB SOCKET
12/07/13 17:18:12 31TM8630_330
Ma
int
e
na
nce
TOC
2014 Insight