Entering a destination – HONDA 2014 Ridgeline - Navigation Manual User Manual

Page 39

Advertising
background image

Navigation System

39

RIDGELINE KA 31SJC860

Showing the Map of Current
Position

The

Current Position selection

assumes that you are looking for a

destination in the immediate area. The

display changes to:

The red arrow indicates your vehicle

position. Find your desired destination

by moving the joystick left, right, up, or

down. The map and crosshairs will

move in the same direction.

The yellow box indicates the area you

will see when you click on the current

map with the joystick. The scale will

decrease each time you push in on the

joystick, until

Select a destination

appears at the top of the screen.

If desired, use the

ZOOM buttons to

change the map scale. When you have

the crosshairs on the desired icon, map

feature, or road, push in on the joystick.

The address of the location will appear

at the top of the screen.

NOTE:

The selected icon or road segment is

displayed on the 1/2 mile (800 meter) or

less map scale.

If this is the desired destination, push in

on the joystick again. If not, use the

joystick to reposition the crosshairs,

then push in on the joystick again to

display the new address.

If you selected a single icon or road

segment within the target mark, the

following screen appears. Push in on the

joystick again to calculate a route to the

selected destination.

Entering a Destination

Advertising