HONDA 2013 Insight - Owner's Manual - Manual (Page 337)

Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Make sure the two rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
is completely installed.
Place the top of the wiper blade
on the end of the blade assembly,
and slide the blade onto the
assembly. Make sure the blade
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the
new blade.
3.
4.
5.
Wiper Blades
334
BLADE
REINFORCEMENT
BLADE
12/07/13 17:19:21 31TM8630_339
Ma
int
e
na
nce
TOC
2013 Insight