HONDA 2013 Insight - Owner's Manual - Manual (Page 97)

You can customize some of the
vehicle control settings to your
preference. Here are the settings
you can customize:
METER SETUP
When you want to change the
vehicle control settings, press the
INFO (
/ ) button to select CHG
SETTING, then press the SEL/
RESET button.
Each time you press the INFO ( /
) button, the screen changes as
shown on the next page. Press the
INFO (
/ ) button until you see
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If you do not make any changes,
select ‘‘EXIT.’’ The display returns to
the normal display.
You can also use the select/reset
knob in the instrument panel. Turn
the knob to select a setting and press
it to enter your selection.
If you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on
page .
LIGHTING SETUP
DOOR SETUP
117
Customize Settings
Multi-Information Display
94
12/07/13 16:49:17 31TM8630_099
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
TOC
2013 Insight