HONDA 2012 Insight - Owner's Manual - Manual (Page 342)

Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Make sure the two rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
Make sure the blade is completely
installed.
Place the top of the wiper blade on
the end of the blade assembly, and
slide the blade onto the assembly.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
3.
4.
5.
Wiper Blades
336
BLADE
REINFORCEMENT
BLADE