Cruise control – HONDA 2008 Fit - Owner's Manual User Manual

Page 134

Advertising
background image

Push the CRUISE button on the
steering wheel. The CRUISE
MAIN indicator on the instrument
panel comes on.

Press and release the SET/
DECEL button on the steering
wheel. The CRUISE CONTROL
indicator on the instrument panel
comes on to show the system is
now activated.

Cruise control may not hold the set
speed when you are going up and
down hills. If your speed increases
going down a hill, use the brakes to
slow down. This will cancel cruise
control. To resume the set speed,
press the RES/ACCEL button. The
indicator on the instrument panel will
come back on.

When climbing a steep hill, the
automatic transmission may
downshift to hold the set speed.

Cruise control allows you to maintain
a set speed above 25 mph (40 km/h)
without keeping your foot on the
accelerator pedal. It should be used
for cruising on straight, open
highways. It is not recommended for
city driving, winding roads, slippery
roads, heavy rain, or bad weather.

Accelerate to the desired cruising
speed above 25 mph (40 km/h).

The main switch can be left

on, even when the system is not in
use.

1.

2.

3.

On Sport model and Canadian LX
model

Cruise Control

Using the Cruise Control

Fe
a

tu

re

s

131

NOTE:

DECEL/SET
BUTTON

CRUISE BUTTON

RES/ACCEL
BUTTON

CANCEL BUTTON

Improper use of the cruise
control can lead to a crash.

Use the cruise control only
when traveling on open
highways in good weather.

2008 Fit

Table Of Contents

Main Menu

Advertising