HONDA 2008 Fit - Owner's Manual - Manual (Page 210)

To replace the rear wiper blade:
Raise the wiper arm off the glass.
Slide the blade out of the wiper
arm.
Examine the new wiper blade. If it
has no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade and install them in the
slots along the edge of the new
blade.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the wiper arm down against
the windshield, the passenger’s
side first, then the driver’s side.
Place the top of the wiper blade on
the end of the blade assembly, and
slide the blade onto the assembly
in the direction pointed to by the
arrow.
Make sure the blade is completely
installed.
2.
3.
1.
5.
6.
7.
CONTINUED
Wiper Blades
Ma
int
e
na
nce
207 2008 Fit
Table Of Contents Main Menu