HONDA 2007 Accord Coupe - Owner's Manual - Manual (Page 250)

Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Reinstall the air intake cover.
Reinstall the two fasteners and
secure them by pushing on the
heads until they lock.
(Driver’s side)
Turn on the headlights to test the
new bulb.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
3 .
2 .
4 .
5 .
6 .
7 .
Lights
Ma
int
e
na
nce
247
FASTENERS
4 -cylinder models
TAB BULB TAB
BULB
AIR INTAKE
COVER
V6 models V6 models
Main Menu Table of Contents s t Main Menu s t Table of Contents