Brake and clutch fluid – HONDA 2006 Civic Sedan - Owner's Manual User Manual

Page 199

Advertising
background image

Manual Transmission only

The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If it is not, add
brake fluid to bring it up to that level.
Use the same fluid specified for the
brake system.

Low fluid level can indicate a leak in
the clutch system. Have this system
inspected as soon as possible.

The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.

Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement.

Using any non-Honda brake fluid can
cause corrosion and decrease the life
of the system. Have the brake
system flushed and refilled with
Honda Heavy Duty Brake Fluid
DOT 3 as soon as possible.

Brake fluid marked DOT 5 is not
compatible with your vehicle’s
braking system and can cause
extensive damage.

Check the brake fluid level in the
reservoir monthly.
Replace the brake fluid according to
the time recommendation in the
maintenance minder schedule.

Brake and Clutch Fluid

Brake Fluid

Clutch Fluid

198

MAX

MIN

MAX

MIN

Main Menu

Table of Contents

Advertising