Cruise control – HONDA 2006 Civic Coupe - Owner's Manual User Manual

Page 180

Advertising
background image

You can increase the set cruising
speed in any of these ways:

Press and hold the RES/ACCEL
button. When you reach the
desired cruising speed, release the
button.

Push on the accelerator pedal until
you reach the desired cruising
speed, then press the DECEL/
SET button.

To increase the speed in very
small amounts, tap the RES/
ACCEL button. Each time you do
this, your vehicle speeds up about
1 mph (1.6 km/h).

Press and hold the DECEL/SET
button. Release the button when
you reach the desired speed.

To slow down in very small
amounts, tap the DECEL/SET
button. Each time you do this,
your vehicle slows down about 1
mph (1.6 km/h).

Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL indicator on
the instrument panel goes out.
When the vehicle slows to the
desired speed, press the DECEL/
SET button.

You can decrease the set cruising
speed in any of these ways:

Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The vehicle
will return to the set cruising speed.

Resting your foot on the brake or
clutch pedal causes the cruise
control to cancel.

Cruise Control

Changing the Set Speed

176

Main Menu

Main Menu

Table of Contents

Advertising