HONDA 2006 Civic Coupe - Owner's Manual - Manual (Page 22)

The seat belts use the same
monitoring system as the front
airbags. The system may not work
properly under these conditions:
This system monitors the front seat
belts.
If you turn the ignition switch to the
ON (II) position before your seat
belt is fastened, the beeper will
sound and the indicator will flash. If
your seat belt is not fastened before
the beeper stops, the indicator will
stop flashing but remain on.
Your seat belt system includes lap/
shoulder belts in all five seating
positions. The front seat belts are
also equipped with automatic seat
belt tensioners.
Have your vehicle checked by a
dealer if the indicator comes on or
the beeper sounds when there is no
front passenger or objects on the
front seat.
The front passenger’s seat-back is
pressed forward by a folded-down
rear seat.
The front passenger is not sitting
properly.
Placing heavy items on the front
passenger’s seat.
If a front passenger does not fasten
their seat belt, the indicator will
come on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
If either the driver or a front
passenger does not fasten their seat
belt while driving, the beeper will
sound and the indicator will flash
again at regular intervals.
When no one is sitting in the front
passenger’s seat, or a small child is
riding there, the indicator will not
come on and the beeper will not
sound.
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your passengers to
fasten your seat belts.
Additional Information About Your Seat Belts
Seat Belt System Components
18
Main Menu Main Menu Table of Contents