Lights – HONDA 2006 Civic Hybrid - Owner's Manual User Manual
Page 201
To change the bulb on the driver’s
side, start the engine, turn the
steering wheel all the way to the
right, and turn off the engine. To
change the bulb on the passenger’s
side, turn the steering wheel to the
left.
Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Remove the electrical connector
from the socket by pushing on the
tab and pulling the connector
down.
Push the electrical connector back
onto the new socket. Make sure it
is on all the way.
Turn on the headlights to test the
new socket.
Insert the new socket into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
5.
6.
1.
7.
8.
3.
4.
CONTINUED
Replacing the Front Side Marker/
Parking/Turn Signal Light Bulb
Lights
Ma
int
e
na
nce
199
TAB
HOLDING CLIP
SOCKET
Main Menu
Table of Contents