HONDA 2006 Element - Owner's Manual - Manual (Page 43)

CONTINUED
With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle.
When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a locking mechanism
that must be activated to secure a
child seat.
1. 8.
9.
Installing a Child Seat
Installing a Child Seat with a Lap/
Shoulder Belt
Dr
iv
er
and
P
asseng
er
Saf
e
ty
41
TETHER ANCHOR
TETHER STRAP HOOK
Main Menu Table of Contents