HONDA 2006 Element - Owner's Manual - Manual (Page 184)

Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Turn on the lights to make sure
the new bulb is working.
Put the light assembly back into
the body, bottom first. Push on the
top edge until it snaps into place.
Open the hatch and the tailgate.
Remove the two mounting screws
with a Phillips-head screwdriver,
and remove the taillight assembly
from the body by pulling it back. Remove the socket by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Determine which of the three
bulbs is burned out: brake/
taillight, turn signal light or back-
up light.
1.
4.
5.
2.
3.
4.
6.
Replacing Rear Bulbs
Lights
182
TAILLIGHT ASSEMBLY
SCREW
SCREW
SOCKET SOCKET
SOCKET
Main Menu Table of Contents