Changing a flat tire – HONDA 2006 CR-V - Owner's Manual User Manual

Page 223

Advertising
background image

To keep the tailgate door open,
use the stop from the tool kit. Put
the stop on the support strut as
shown.

If you are towing a trailer, unhitch
the trailer.

Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.

If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area that is
far away from the traffic lanes.

Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park (automatic)
or reverse (manual). Apply the
parking brake.

1.

2.

3.

Changing a Flat Tire

220

JACK

STOP

SPARE TIRE

TOOL

The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.

Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.

Main Menu

Table of Contents

Advertising