Instrument panel indicators – HONDA 2006 CR-V - Owner's Manual User Manual

Page 63

Advertising
background image

If you exceed 10,000 miles (16,000
km) without having the scheduled
maintenance performed, this
indicator will remain on as a constant
reminder.

Your dealer will reset this indicator
after completing the scheduled
maintenance. If this maintenance is
done by someone other than your
dealer, reset the indicator as follows.

Turn off the engine.

Press and hold the Select/Reset
button on the instrument panel,
then turn the ignition switch to the
ON (II) position.

Hold the button for about 10
seconds until the indicator goes
off.

This indicator comes on when the
washer fluid level is low. Add washer
fluid when you see this indicator
(see page

).

This indicator reminds you that it is
time to take your vehicle in for
scheduled maintenance.
Refer to the maintenance schedule
for normal and severe driving
conditions on pages

and

.

For the first 8,000 miles (12,800 km)
after the maintenance required
indicator is reset, it will come on for
2 seconds when you turn the ignition
switch to the ON (II) position.

Between 8,000 miles (12,800 km)
and 10,000 miles (16,000 km), this
indicator will come on for 2 seconds
when you first turn the ignition
switch to the ON (II) position, and
then flash for 10 seconds.

1.

2.

3.

198

188

187

Canadian models only

Instrument Panel Indicators

Washer Level Indicator

Maintenance Required
Indicator

60

SELECT/RESET BUTTON

Main Menu

Table of Contents

Advertising