HONDA 2005 Accord Sedan - Owner's Manual - Manual (Page 215)

Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
dealer) is required. Open the hood and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
Always change the oil and filter
according to the recommendations in
the maintenance schedule. The oil
and filter collect contaminants that
can damage your engine if they are
not removed regularly.
Run the engine until it reaches
normal operating temperature,
then shut it off.
Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.
3. 2.
1.
Changing the Oil and Filter
214
WASHER
4-cylinder models
WASHER
6-cylinder models
OIL DRAIN BOLT OIL DRAIN BOLT
Main Menu Table of Contents Main Menu