HONDA 2005 Accord Sedan - Owner's Manual - Manual (Page 231)

To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
Install the new bulb and turn it
clockwise to lock it in place.
Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
Put the inner fender cover in place.
Install and lock each holding clip
by pushing on the center.
Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Open the trunk.
Remove the light assembly cover
by pulling its outside edge.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
Reinstall the light assembly cover.
Test the new bulb to make sure it
works.
Test the new bulb to make sure it
works.
5.
6.
7.
8.
9.
3.
2.
1.
4.
5.
6.
Lights
Replacing Rear Bulbs
(in Fenders)
230
BULBS
SOCKETS
COVER
Main Menu Table of Contents Main Menu