HONDA 2005 Civic Coupe - Owner's Manual - Manual (Page 192)

Turn the jack’s end
counterclockwise to loosen it, then
remove the jack. Loosen each wheel nut 1/2 turn
with the wheel nut wrench. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch. 6. 7. 8.
Changing a Flat Tire
190
JACK JACKING POINTS
WHEEL NUT WRENCH
Main Menu Table of Contents