HONDA 2005 Civic Coupe - Owner's Manual - Manual (Page 194)

Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
Lower the vehicle to the ground
and remove the jack.
Remove the center cap from the
flat tire.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
12.
13.
14. 15. On HX, Special Edition, and EX
models in the U.S., REVERB and Si
models in Canada
Changing a Flat Tire
192
80 lbf·ft (108 N·m , 11 kgf·m)
Main Menu Table of Contents