HONDA 2005 Element - Owner's Manual - Manual (Page 201)

Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch. Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Remove the wheel nuts and wheel
cover. The wheel nuts will be very
hot if you were recently driving. The
wheel cover cannot be removed
without first removing the wheel
nuts. Do not attempt to forcibly pry
the wheel cover off with a
screwdriver or other tool.
9. 10.
CONTINUED
LX and DX models
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
199
EXTENSION
WHEEL WRENCH JACKING POINTS
WHEEL COVER
WHEEL NUTS
WHEEL NUTS
Main Menu Table of Contents