HONDA 2005 Element - Owner's Manual - Manual (Page 41)

CONTINUED
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
To install a LATCH-compatible child
seat: Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Remove both anchor covers by
pulling forward.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the second
row seats. The lower anchors are
located between the seat-back and
seat bottom, and are to be used only
with a child seat designed for use
with LATCH.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
The location of each lower anchor is
marked with a small button above
the point.
1.
2.
3.
Installing a Child Seat Using
LATCH
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
39
Rigid type
MARKS
ANCHOR COVER
Main Menu Table of Contents