Brake and clutch fluid – HONDA 2003 Civic Coupe - Owner's Manual User Manual

Page 220

Advertising
background image

The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.

The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If it is not, add
brake fluid to bring it up to that level.
Use the same fluid specified for the
brake system.

Low fluid level can indicate a leak in
the clutch system. Have this system
inspected as soon as possible.

Always use Honda DOT 3 brake
fluid. If it is not available, you should
use only DOT 3 or DOT 4 fluid, from
a sealed container, as a temporary
replacement. However, the use of
any non-Honda brake fluid can cause
corrosion and decrease the life of the
system. Have the brake system
flushed and refilled with Honda
DOT 3 brake fluid as soon as
possible.

Brake fluid marked DOT 5 is not
compatible with your car’s braking
system and can cause extensive
damage.

Brake System

Clutch System

Brake and Clutch Fluid

Maintenance

217

MAX

MIN

MAX

MIN

Main Menu

Table of Contents

Advertising