Drive belts, timing belt – HONDA 2003 Civic Coupe - Owner's Manual User Manual
Page 234
The belts should have the following
‘‘play’’ or deflection.
The timing belt should normally be
replaced at the intervals shown in
the maintenance schedule.
In very high temperatures
(over 110°F, 43°C).
In very low temperatures
(under
20°F,
29°C).
Replace this belt at 60,000 miles (U.S.)
or 100,000 km (Canada) if you
regularly drive your car in one or
more of these conditions:
Check the condition of the two drive
belts. Examine the edges of each
belt for cracks or fraying.
Power steering belt:
Alternator belt
(On cars without A/C):
Compressor belt
(On cars with A/C):
If you see signs of wear or looseness,
have your dealer adjust or replace
the belts.
Check the tension of each belt by
pushing on it with your thumb
midway between the pulleys.
Drive Belts
Timing Belt
Drive Belts, Timing Belt
Maintenance
231
POWER STEERING BELT
ALTERNATOR BELT
0.51
0.65 in (13.0
16.5 mm)
0.33
0.43 in (8.5
11.0 mm)
0.33
0.43 in (8.5
11.0 mm)
Main Menu
Table of Contents