Ignition switch – HONDA 2003 Insight - Owner's Manual User Manual
Page 135
The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
You can
operate the audio system and the
accessory power sockets in this
position.
If you leave the key in the ignition
switch in the ACCESSORY (I)
position and open the driver’s door,
you will see a ‘‘RETURN IGNITION
SWITCH TO LOCK (0) POSITION’’
message on the multi-information
display and hear a reminder beeper.
If you turn the ignition key to the
ACCESSORY (I) position with the
driver’s door closed, you will see an
‘‘ACCESSORY (I) POSITION’’
message on the multi-information
display to inform you of the key
position.
You can insert or
remove the key only in this position.
To turn the key, the shift lever must
be in Park, and you must push the
key in slightly.
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
CONTINUED
ACCESSORY (I)
LOCK (0)
Ignition Switch
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
131
Main Menu
Table of Contents