HONDA 2003 Insight - Owner's Manual - Manual (Page 327)

Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Install the upper part of the
windshield washer reservoir tank
in the reverse order of removal.
Remove the bulb from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Open the hood.
(Right side)
3.
4.
5.
6.
2.
1.
10.
Lights
Low Beam Headlight
Ma
int
e
na
nce
323
BULB
CONNECTOR
Main Menu Table of Contents