HONDA 2001 Civic Sedan - Owner's Manual - Manual (Page 214)

CONTINUED
Remove the radiator cap.
Turn the ignition ON (II). Turn
the temperature control dial to
maximum heat. Turn off the
ignition. Open the hood. Make
sure the engine and radiator are
cool to the touch. Loosen the drain plug on the
bottom of the radiator. The
coolant will drain through the
splash guard. Remove the drain
bolt and washer from the engine
block.
Draining the coolant requires access
to the underside of the car. Unless
you have the tools and knowledge,
you should have this maintenance
done by a skilled mechanic.
The cooling system should be
completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
genuine Honda All Season
Antifreeze/Coolant Type 2.
1. 3.
2.
Replacing Engine Coolant
Cooling System
Maintenance 211
Main Menu Table of Contents