HONDA 2001 Civic Sedan - Owner's Manual - Manual (Page 227)

Put the new spark plug into the
socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it. Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:
Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
Use a wrench to remove the nut
holding the ignition coil. Remove
the ignition coil by pulling it
straight out. 4.
5.
6. 7.
Spark Plugs
Maintenance 224
13 lbf·ft (18 N·m , 1.8 kgf·m)
Main Menu Table of Contents