IC Realtime The Sentinal WDR 36x Optical Zoom, 32x Digital Zoom IR PTZ Camera - Manual (Page 30)

30
2.7 SPECIAL
1. STABLISER OFF / ON
2. HR OFF / 1~7
3. IMAGE FLIP OFF / ON
4. IMAGE MIRROR OFF / ON
5. SHARPNESS 0~14
6. 2D-DNR AUTO / OFF~15
7. 3D-DNR AUTO / OFF~15
8. HLC OFF / ON
9. DE-FOG OFF / AUTO / USER
10. EXIT
• STABLISER
ON ] Set to “ON” to mitigate vibrations when the camera is installed in an unstable
environment - such as, mounted on a pole which is subject to movement.
• HR
Horizontal resolution in Colour mode is 700 TV Lines. Users can increase the HR up to
750TVL - by adjusting the level in BW mode.
But, if the level is set too high in B/W mode, it can make create image noise and/or edge
distortion.
• IMAGE FLIP
The image is flipped vertically.
• IMAGE MIRROR
The image is flipped horizontally.
• SHARPNESS
Overall sharpness on the screen is adjustable.
• 2D-DNR/3D-DNR (Digital Noise Reduction)
Reduces image noise in low light conditions. Lowering the DNR level reduces noise in low
light conditions, but low levels of DNR can also cause ghosting.