1 general introduction, 1 overview, 2 features – IC Realtime 3.0 MegaPixel 3.3-12mm VF IR Vandal IP Dome with SD & POE (ICIP3000DVIR) User Manual

Page 7

Advertising
background image

1 General Introduction

1.1 Overview

This series IP camera integrates the traditional camera and network video technology. It adopts

audio and video data collection, transmission together. It can connect to the network directly without

any auxiliary device.

This series IPC uses standard H.264 video compression technology and G.711a audio

compression technology, which maximally guarantee the audio and video quality.

This series IPC enclosure has the strong resistance capacity, which can guarantee the proper work

performance under heavy strike. It supports real-time monitor and listening at the same time. It

supports analog video output and dual-way bidirectional talk.

It can be used alone or used in a network area. When it is used lonely, you can connect it to the

network and then use a network client-end. Due to its multiple functions and various uses, this series

IPC is widely used in many environments such office, bank, road monitor and etc.

1.2 Features

User

Different user rights for each group, one user belongs to one group.

The user right shall not exceed the group right.

Management

Support central server backup function in accordance with your configuration

and setup in alarm or schedule setting

Storage

Support record via Web and the recorded file are storage in the client-end

PC.

Function

Support built-in SD card.

Support local SD card hot swap, support short-time storage when encounter

disconnection.

Real-time respond to external local alarm input and video detect as user pre-

Alarm

defined activation setup and exert corresponding message in screen and

audio prompt(allow user to pre-record audio file)

Function

Real-time video detect: motion detect, camera masking.

Can generate an alarm when network abnormal, SD card abnormal event

occurred.

IPC supports one-channel audio/video data transmit to network terminal and

Network

then decode. Delay is within 270ms (network bandwidth support needed)

Max supports 20 connections.

Monitor

Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,

MULTICAST, RTP/RTCP, RTSP and etc.

Support web access, widely used in WAN.

Network

Realize IPC configuration and management via Ethernet.

Support device management via web or client-end.

Management

Support various network protocols.

Peripheral

Support the on-off alarm device to alarm via the sound or the light.

Equipment

Power

External power adapter DC12V/AC 24V

Support PoE.

Assistant

Log function

Function

Support PAL/NTSC


1

Advertising