ILY DUO / DUO PLUS Blu-ray/DVD/CD Duplicator - Manual (Page 9)

5. Verify
– This command verified readability on the master disc and/or all target discs. This
command is especially useful for audio CD duplication.
Note: The verification process uses a Disc Readability Check to individually check the presence of data on each copy. This process
does not compare the contents of duplicated discs against that of the master. It only verifies that the duplicated discs are readable.
To start the verify process, please follow the instructions below:
1). Power on the machine (if not already on).
2). Eject disc tray of the Source Drive and place the master disc to be verified. The “master disc” is
the original of which copies are made from.
3). Eject disc tray(s) of the Writer Drives and place copied disc(s) to be verified on the tray(s).
Number of drives used depends on number of copies to be verified. It is not necessary to always
use all drives.
4). Use the scroll buttons to select the com mand “5. Verify” and press the ENT button. The drives will
automatically close trays and begin the verify process.
5). Once the verify process is complete, the trays will eject the discs that have passed the verify
process.
6. Compare
– This command compares copied disc(s) to the master disc and ensures that the copies
are exact duplicates of the master disc. This command is especially useful for BDs, DVDs, data CDs and
video CDs.
Note: The Compare process is a bit-by-bit comparison between the master disc and the copied discs. This operation ensures
that all of the copies are completely identical to the Master disc. This command is not applicable to audio CDs.
To start the Compare process, please follow the instructions below.
1). Power on the machine (if not already on).
2). Eject disc tray of the Source Drive and place the master disc in the designated Source Drive
(usually the top drive). The
“master disc” is the original of which copies are made from.
3). Eject disc tray(s) of the Writer Drives and place copied disc(s) to be compared on the tray(s).
Number of drives used depends on number of copies to be compared. It is not necessary to
always use all drives.
4). Use the scroll buttons to select the com mand “6. Compare” and press the ENT button. The
drives will automatically close trays and begin the compare process.
5). Once the compare process is complete, the trays will eject the discs that have passed the
compare process.
 Start Compare
 Press “ENT”
 Start Verify

 Copy
Complete

 Finish and
Eject Discs
7