Interlogix MCR200-1T/1CX - Manual (Page 18)

12 IFS MCR200-1T/1CX User Manual
Figure 6: Insert a MCR200-1T/1CX into an available slot of the MCR-R15
3. Attach a rack-mount bracket to each side of the MCR-R15
Chassis with screws supplied with the rack.
4. After the brackets are attached to the MCR-R15 Chassis,
use suitable screws to securely attach the brackets to the
EIA 19” rack.
5. Proceed with the steps 4 and steps 5 of the Stand-alone
Installation on page 11 to connect the network cabling and
supply power to your MCR-R15 Chassis.
Note: It is recommended to use the screws supplied with the
mounting brackets. Otherwise, it may cause damage on the
parts if wrong screws are used to install the rack.