Interlogix MC250-1T/1S - Manual (Page 13)

IFS MC250-1T/1S User Manual 9
Mounting Installation
This section describes how to mount the MC250-1T/1S and
make connections to it. Please read the following section and
perform the procedures in the order presented.
Note: In the installation steps below, this Manual uses the IFS
8 Port Industrial Gigabit Switch, GE-DSGH-8, as an example.
However, the steps for any IFS Industrial Switch & Industrial
Media Converter are similar.
Mounting to a DIN-Rail
The DIN-Rail kit comes assembled on the MC250-1T/1S out of
the box. Please refer to following figures to install the device
on a DIN-Rail.