Interlogix MC201-1P/1FS - Manual (Page 17)

IFS MC201-1P/1FS User Manual 11
Specifications
Ethernet
Data Rate 10/100/1000Mbps
Throughput (packet per second) 148810pps@64Bytes
Switch Architecture Store-and-Forward
Flow Control
Back pressure for Half-Duplex mode
Pause from for Full-Duplex mode (IEEE 802.3x)
Connector
RJ-45 with Auto-MDI/MDI-X and PoE injector function
Cable Type and Distance 10Base-T (Cat 3, 4, 5e) or 100Base-T (Cat 5e) – 328ft (100m)
Fiber MC100FX-TX-PoE MC201-1P/1FS
Data Rate 100Base-FX 100 Base-FX
Connector SC SC
Fiber Type Multi-mode (50/125μm or 62.5/125μm Single mode (9/125μm)
Distance Up to 2km Up to 15km
Power Over Ethernet (PoE)
PoE Standard IEEE 802.3af
Power Pin Assignment (+) Pins 1 & 2; (–) Pins 3 & 6
Power Output (Max. 1 PoE Device) PoE 48 VDC, Max. 15.4 watts, 350mA
LED Indicators
Power Status On - Green
10/100Base-T Link Data Activity - Green
100Base-FX Link Data Activity - Green
PoE In Use Detection of PSE Device - Green
LFP Mode Switch
On If either TX or FX port is faulty, disable other port
Off Active link LED will still operate if other port is faulty
Electrical and Mechanical
Input Power 48VDC @ 0.38A
Enclosure Metal
Dimensions (H x W x D) 1.02 x 2.76 x 3.82 in. (26 x 70 x 97 mm)
Weight 0.44 lbs. / 200g
Environmental
Operating Temperature 0ºC~50ºC
Storage Temperature -120ºC~70ºC
Relative Humidity 0%–90% (non-condensing)