Interlogix NS3500-28T-4S Quick Start - Manual (Page 7)

- 7 -
4. Logon to the Console
Once the terminal is connected to the device, power on the Managed Switch and the terminal will
display “running testing procedures”. Then, the following message asks to log-in user name and
password. The factory default user name and password are shown as follows and the login screen in
Figure 4-1 appears.
Username: admin
Password: admin
Figure 4-1:
Managed Switch Console Login Screen
The user can now enter commands to manage the Switch.
For a detailed description of the commands, please refer to the following chapters.
Note:
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console
interface.