Interlogix MS-PoE - Manual (Page 16)

Chapter 2: Hardware Installation
10 MS-PoE Injector User Manual
4. Power on the remote device. The LED indicator on SP-POE remains
on.
Figure 3: Connection architecture over MS-PoE / SP-POE
1. Switch
2. Power
3. Data
4. Wireless Access Point
100 Base-TX UTP
100 Base-TX UTP with PoE
Power line (DC)
Note: According to IEEE 802.3af standard, the MS-PoE will not inject
power to the cable if it is not connect to IEEE 802.3af devices.
Please ensure the output voltage is correct before applying power to
remote devices.