Interlogix UltraView ProBridge 2 - Manual (Page 11)

Calibur Kalatel KA2 ProBridge 11 0150-0217B
Default Jumper Settings
The default jumper settings are listed below:
PIN # DEFAULT STATUS
JP2 RS485 Position
JP3 RS485 Position
JP4 RS485 Position
JP5 RS485 Position
P6 Pin 1 Installed
P6 Pin 2 Installed
P6 Pin 3 Not Installed
P6 Pin 4 Not Installed
P6 Pin 5 Not Installed
P6 Pin 6 Not Installed
P6 Pin 7 Not Installed
P6 Pin 8 Not Installed
P6 Pin 9 Not Installed
P6 Pin 10 Not Installed
P6 Pin 11 Not Installed
P6 Pin 12 See Bulleted items
•
No Jumper Installed: Straight Preset Mapping, i.e. Preset 1 is Preset 01 on
Dome.
•
Jumper Installed: Offset Preset Mapping, i.e. Preset1 is Preset 00 on Dome.