Interlogix TruVision Intelligent IP Dome Configuration Manual - Manual (Page 12)

10 TruVision 12/32 Series IP Camera Configuration Manual
Figure 3: Example of the Local configuration window
Table 3: Overview of the Local configuration window
Parameters Description
Live View Parameters
1. Protocol Specifies the network protocol used.
Options include: TCP, UDP, MULTICAST and HTTP.
2. Live View Performance Specifies the transmission speed.
Options include: Shortest Delay or Auto.
3. Rules It refers to the rules on your local browser. Specify whether or
not to display the colored marks when motion detection, face
detection, and intrusion detection are triggered. For example,
when the rules option is enabled and a face is detected, the
face will be marked with a green rectangle in live view.
4. Image Format Choose the image format for a snapshot: JPEG or BMP.
Record File Settings
5. Record File Size Specifies the maximum file size.
Options include: 256 MB, 512 MB and 1G.
6. Save Record Files to Specifies the directory for recorded files.
7. Save Downloaded Files to Specifies the directory for downloaded files.
Picture and Clip Settings
8. Save Snapshots In Live
View To Specifies the directory for saving snapshots in live view mode.
9. Save Snapshots When
Playback To Specifies the directory for saving snapshots in playback mode.
10. Save Clips To Specifies the directory for saving video clips in playback mode.