Setting up the camera – Interlogix TruVision Intelligent IP Dome Installation Manual User Manual
Page 21
Advertising

Installation Guide
17
Figure 4: IP VF outdoor dome camera
1. Dome liner
2. Bubble Assembly
3. SD card
4. Analog video output
5. Reset button
6. Ethernet RJ45 PoE port
7. Power supply
8. Lens
9. Alarm I/O
Setting up the camera
Note:
If the light source where the camera is installed
experiences rapid, wide- variations in lighting, the camera may
not operate as intended.
1
2
3
4
5
8
9
6
7
Advertising
This manual is related to the following products: