Interlogix TruVision IP Open Standards Box User Manual - Manual (Page 24)

2BChapter 3: Network and streaming configuring
Figure 9: Network subfolder screen (to be updated - no NFS)
Table 4: Network parameters
Parameters Description
NIC type: Specifies the NIC type. Default is 10M/100M Auto. Other
options include: 10M half-dup, 10M full-dup, 100M half-dup and 100M
full-dup and 10M/100M auto. Default is 10M/100M.
IP address: Specifies the IP address of the camera.
Subnet mask: Specifies the subnet mask. Default value is
255.255.255.0.
Gateway: Specifies the gateway IP address. Default value is 0.0.0.0.
DNS server: Specifies the DNS server for your network. Default value is
0.0.0.0.
HTTP port: Specifies the port used for the Internet Explorer (IE)
browser. Default value is 80.
Network
PPPoE Use this option to retrieve a dynamic IP address.
Specifies either DynDNS or IP server. DDNS
For future use. NFS
E-mail Specifies the e-mail address to which messages are sent when an
alarm occurs. It is not possible to send an attachment with the e-mail.
20 TruVision IP Cam Open-Standards User Manual