Interlogix TruVision DVR 12 User Manual - Manual (Page 62)

60 TruVision DVR 12 User Manual
The IR remote control can be programmed with a unique device ID address so
that the controller will only be able to communicate with recorders with that
address. No programming is necessary if using a single recorder.
The device ID address only applies when using a remote control and not when
using a keypad.
You can purchase a remote control by ordering part number TVR-REMOTE-1.
Figure 11: IR remote control
Item Description
1. Alarm Acknowledge an alarm.
2. Device Enable/disable the IR remote control to control the recorder.
3. Numeric buttons Select a camera, and enter a number in a menu option.
4. Display Switch between the different multiview formats.
5. Mon A and Mon B Switch between monitors A and B.
6. Live Return to live view mode.
7. Menu Activate the main menu.
8. Seq Start /stop sequencing.