Interlogix NVR 20 Quick Start - Manual (Page 10)

EN ‐ 8 TruVision NVR 20 Quick Start Guide
video or go back into the Configuration parameters for
more detailed system configuration.
For detailed configuration instructions and setting of NTP
time synchronization, please refer to the full User
Manual.
Live View (Preview)
When you first log into the TVN 20, the default page is
on the Live view tab. The various buttons are explained
in Figure 6 below.
Figure 6: Front panel
Item Name Description
1 Connection Tree The left hand panel shows the configured
IP cameras on the TVN 20. Clicking on an
individual camera’s arrow icon will load it
into the current display window.
Depending on the image size and mega
pixel rating of the camera, loading the
camera may take several moments.
2 Live Display
modes
The user can display cameras live in a 1-
Up, 4-Up and 9-Up View. In a multi-screen
mode, the user can simply click the TVN
20 device icon at the top of the camera list
to automatically load as many cameras in
the display (4 in 4-Up, and 9 in 9-Up).
To load a camera into a specific tile of a
multi-up display, the user just highlights
the tile and then clicks the desired camera
in the list.
3 Stop Streaming Stops all streaming
4 Capture Takes a snapshot of the currently highlight
camera and saves it to the local browser
PC.
5 Start Recording Allows local PC recording of all cameras
active in the display.
6 Stops Recording Stops manual recording of the displayed
streams.
Item Name Description
7
8 Previous Page
Next Page Allows the user to sequence through the
available cameras. If the display is in 1-Up
mode the cameras are sequenced in order
with each click of Next and Previous Page
elements. If the first camera loaded was
Camera 5, pressing the Next Page button
will advance back to Camera 1 and then
each successive Next Page button click
will advance to Camera 2, 3, 4 etc. If the
display is in a multi-up display, pressing
next will sequence through numerical
groupings (in 4-Up, Cameras 1-4, 5-8 etc.)
9 Audio If the camera is capable of supporting
audio and audio is enabled for that
camera on the TVN 20, the user can turn
on audio.
Clicking the arrow key brings up the audio
volume control
10 Full-screen The display can be expanded to screen by
pressing the Expand button in the upper
right hand corner of the display.
11 PTZ Controls The current version of the TVN 20 does
not support PTZ control. This will become
available in a subsequent firmware
release. Please check with your Interlogix
representative or business partner for the
latest firmware capabilities.
12 Picture Controls These camera controls are only available
for select IP Cameras, Please see the IP
Compatibility Chart for the listing of
cameras that support this feature.