Interlogix NVR 21 (S/P) User Manual - Manual (Page 121)

TruVision NVR 21(S/P) User Manual 115
Chapter 13
Storage management
This chapter describes how to handle HDDs.
Initializing HDDs
The in-built HDD must be initialized before it can be used. You can also re-initialize the
HDD. However, all data on the HDD will be destroyed.
To initialize an HDD:
1. From the menu toolbar, click System Settings > Hard Disk .
2. Select the HDD to be initialized.
3. Click the Initialize button to begin initialization.
After the HDD has been initialized, the status of the HDD changes from Abnormal to
Normal.